7,000-Gallon Pool: Chemistry & Equipment Guide
Chemistry and equipment numbers for a 7,000-gallon pool: how much chlorine, salt, shock, and stabilizer to add, plus what size pump you need.
Key computed numbers for a 7,000-gallon pool
15 GPM
pump flow for an 8-hour turnover, plus chlorine, salt, shock, and CYA below
This is the quick-reference chemistry and equipment sheet for a 7,000-gallon pool. Every figure here is computed from standard pool-care formulas for 7,000 gallons, so you can size a dose or a pump at a glance. For routine chlorine, raising free chlorine by 2 ppm takes about 1.9 cups of liquid chlorine. To shock to 10 ppm free chlorine you would add about 14.0 oz of cal-hypo.
| Question | Computed answer for this pool |
|---|---|
| Chlorine (raise FC 2 ppm) | 1.9 cups liquid, or 2.8 oz cal-hypo |
| Salt (reach 3,200 ppm) | 187 lbs (~5 bags) |
| Shock (reach 10 ppm FC) | 14.0 oz cal-hypo |
| Stabilizer (reach 30 ppm CYA) | 1.75 lbs |
| Pump (8-hour turnover) | 15 GPM |
If you run a saltwater pool, reaching a typical 3,200 ppm salt level from zero takes about 187 pounds of pool salt, roughly 5 forty-pound bags. For stabilizer, reaching 30 ppm CYA takes about 1.75 pounds of cyanuric acid. On the equipment side, an 8-hour turnover for this pool needs a pump that moves about 15 gallons per minute, and a variable-speed model will hit that target far more cheaply than a single-speed.
Use the links below to open the full answer for each question, with the method, a side-by-side table, and a safety note. Always confirm these estimates against your own water test before dosing, and remember the core safety rules: never mix pool chemicals, always add chemical to water rather than water to chemical, run the pump while dosing, and retest before adding any more.
All answers for a 7,000-gallon pool
Gear for this pool size
The first tool for every number on this page.
Hit your turnover cheaply and quietly.
Keeps a pool this size clean hands-free.
Get the exact number for your water
The figures above are computed for a 7,000-gallon pool using standard formulas. To dose to your real test readings, open the All Pool Calculators and enter your current and target levels. Not sure of your volume? Start with the pool volume calculator, then come back. You can also see every chemistry and equipment number for this size on the 7,000-gallon pool guide, browse all pool answers, or return to the PoolCareCalculator home page.
Frequently Asked Questions
How was the number for a 7,000-gallon pool calculated?
Every figure on this page comes from standard pool-care formulas applied to 7,000 US gallons, not a guess. Dosing scales with volume, so the same method works for any pool size. Always confirm against your own water test before adding anything, since real pools vary.
Is this dose exact for my 7,000-gallon pool?
Treat it as a close estimate. Product strengths, your starting readings, and your CYA all shift the real amount. Add a little less than the calculated figure, run the pump to circulate, wait, and retest before topping up. It is always easier to add more than to undo an overdose.
Can I mix pool chemicals to save time?
No. Never mix two pool chemicals, including two different chlorine products or chlorine and acid, since the reaction can release toxic gas or cause a fire. Add one product at a time, pour chemical into the water, run the pump, and retest before adding anything else.
Taking care of a pool?
Use our free calculators and guides to get every number right.
Pool Care Planner: $39